Avant snow blower is an efficient snow removal tool with advanced technology. The frame and discharge chute are designed so that there are as little as possible passive surfaces which would prevent snow movement. This open design means efficient snow blowing – the feeding auger eats the snow quickly and easily and moves it to the impeller which throws the snow out through the discharge chute. Thanks to this design the blower works well both with dry and wet snow and clears compacted snow banks also. The feeding auger is made of wear-resistant Hardox steel.
The blower is equipped with two hydraulic motors: one for the auger and one for the discharge impeller. The new type hydraulic motor on the impeller improves the efficiency of the blower considerably. Snow discharge can be directed accurately: the discharge chute can be rotated 270° electrically, operated from the driver’s seat. Throwing height can be adjusted manually, electric throwing height adjustment is available as an option and requires the optional attachment control switch pack on the loader.
Two working widths available: 1150 mm and 1500 mm.
|Working width||1150 mm||1500 mm|
|Total width||1230 mm||1580 mm|
|Frame height||680 mm||680 mm|
|Auger diameter||460 mm||460 mm|
|Weight||240 kg||296 kg|
|Electric throwing height adjustment||A430172|
The optional attachment control switch pack is recommended on the loader. If the snow blower is equipped with the electric throwing height adjustment, the switch pack must be mounted.