
Buckets, material handling
General bucket
Avant general buckets are designed with the operator in mind. Without leaving the seat, the operator can see the front edge of the bucket. The sides of the general buckets flare out for complete emptying of all kinds of material. Also, there are no reinforcement plates inside the bucket to that would interfere with loading or emptying.
To further enhance the operator’s visibility, there are narrow slots at the upper end of the bucket to allow the operator to see into the bucket and prevent spillage back towards the loader.
Available with straight edge and with teeth.
General purpose bucket, suitable for almost every shovelling job
Excellent visibility to the edge of the bucket
Width | Edge | Capacity | Weight | Product no |
35.4 in | Straight | 5.3 cu ft | 137 lb | A36711 |
35.4 in | Teeth | 5.3 cu ft | 159 lb | A36716 |
41.3 in | Straight | 4.2 cu ft | 110 lb | A36702* |
41.3 in | Straight | 6.7 cu ft | 161 lb | A36710 |
41.3 in | Teeth | 6.7 cu ft | 183 lb | A36780 |
45.3 in | Straight | 7.4 cu ft | 172 lb | A36709 |
45.3 in | Teeth | 7.4 cu ft | 201 lb | A36779 |
51.2 in | Straight | 8.5 cu ft | 190 lb | A36698 |
51.2 in | Teeth | 8.5 cu ft | 216 lb | A36778 |
53.1 in | Straight | 8.5 cu ft | 199 lb | A36996 |
53.1 in | Teeth | 8.5 cu ft | 225 lb | A36997 |
*) A36702 is the general bucket for 200 series – the dimensions and weight match the lift capacity of 200 series. Wider general buckets can be used on 200 series as light material bucket.