Farming

SLURRY MIXER

Slurry mixer is a special attachment for cattle farms: in cattle buildings with slatted floors, where the animal waste falls through the slats directly to the storage tank below the floor. The slurry that forms in the tank needs to be mixed from time to time so that it stays liquid and moves towards the bigger slurry container which is usually located outside the building.

The unit is equipped with a propeller which mixes the slurry, powered by a hydraulic motor. The mixer is 25 mm thick and 490 mm wide, meant to fit through the floor slat into the storage tank. Working depth is max. 1,5 m. There is also a bolt at the upper end of the mixing shaft, which shows when the mixer can be lifted up through the slat: when the bolt is crosswise in relation to the loader. The mixer is also equipped with a coupling for water hose at the upper end of the frame tube. Water is conducted inside the tube down to the mixing propeller.

  • Special attachment for mixing of slurry in cattle buildings with slatted floors

  • Equipped with a propeller, powered by a hydraulic motor, which mixes the slurry

  • 1 inch thick x 19 inches wide, working depth max. 60 inches – meant to fit through the floor slat into the storage tank below
  • Coupling for water hose on the frame tube

TECHNICAL INFORMATION

Mixing frame thickness x width 1 inch x 19 inches
Working depth max. 59 inches
Total width 21.5 inches
Length 36 inches
Height 85 inches
Weight 165 lbs
Product no. A37389

COMPATIBLE MODELS

Model
220
225
225LPG
313S
320S
420
423
520
523
528
530
630
635
640
745
750
755i
760i
e5
e6
R28
R35
Very compatible
Compatible
Incompatible