Up
Farming and horse stables

Slurry mixer

More images

plus

Farming and horse stables

SLURRY MIXER

The slurry mixer is a special attachment for cattle farms: in cattle buildings with slatted floors, where the animal waste falls through the slats directly to the storage tank below the floor. The slurry that forms in the tank needs to be mixed from time to time so that it stays liquid and moves towards the bigger slurry container which is usually located outside the building.

The unit is equipped with a propeller which mixes the slurry, powered by a hydraulic motor. The mixer is 25 mm thick and 490 mm wide, meant to fit through the floor slat into the storage tank. The working depth is max. 1,5 m. There is also a bolt at the upper end of the mixing shaft, which shows when the mixer can be lifted up through the slat: when the bolt is crosswise in relation to the loader. The mixer is also equipped with a coupling for a water hose at the upper end of the frame tube. Water is conducted inside the tube down to the mixing propeller.

  • Special attachment for mixing of slurry in cattle buildings with slatted floors

  • Equipped with a propeller, powered by a hydraulic motor, which mixes the slurry

  • 25 mm thick x 490 mm wide, working depth max. 1,5 m – meant to fit through the floor slat into the storage tank below
  • Coupling for water hose on the frame tube

TECHNICAL INFORMATION

Mixing frame thickness x width 25 mm x 490 mm
Working depth max. 1500 mm
Total width 550 mm
Length 920 mm
Height 2155 mm
Weight 75 kg
Product no. A37389

SAMHÆF MODEL

Compatible
Adaptable
Incompatible
Model
220
225
225LPG
313S
320S
420 & 423
520
523
525LPG
528
530
R20
R28
R35
630
635
640
735
745
750
755i
760i
850
860i
e5
e6